18 cara untuk pakai vpn mac tanpa program tambahan

cara setting vpn di komputer / laptop mac

Dengan ini saya ingin menunjukan cara setting memasukan VPN tanpa harus instalasi program, langsung dari system setting yang ada pada MAC.

Langsung saja ikuti langkah-langkah di bawah ini =

1. buka System preferences

2. buka open network

3. Lalu tab sebelah kiri pilih proxy

4. masukan nama (bebas mau memasukan nama apa)

5. Interface pilih VPN

6. Tipe VPN pilih PPTP dan buat namanya (bebas), klik CREATE

7. Lalu masukan username dan email yang terdaftar provider VPN

8. Klik Authentication Settings

9. Masukan password yang terdaftar pada provider VPN

10. Klik ok untuk lanjut

11. Klik tombol advanced

12. Checklist 3 pilihan teratas

13. Lalu klik OK untuk melanjutkan

14. Setelah semua setting selesai, klik Apply

15. Tombol CONNECT muncul dan tinggal koneksi ke VPN

16. Jika berhasil, maka akan berubah menjadi tombol Disconnect untuk mematikan VPN setelah dipakai

17. Perhatikan IP address yang berubah


18. ENJOY =)

8 cara setting pakai vpn L2TP tanpa program

Android uses methods

1. Enter: Set - Wireless and network-VPN settings, then select "Add L2TP/IPSec PSK VPN" option

2. After entering this screen, select "Set IPSec pre-shared Key secret", Chinese should be "set up L2TP pre-shared key" (be careful not to tick "Enable L2TP secret Enable L2TP password")

3. In the dialog box, enter " "

4. Next select the VPN name, enter the key:

5. And then select Set VPN server, enter the server address individual centers

6. Finally fill in user name password, you can

7. Using dial-up and use pptp l2tp like, as long as the agreement can be selected for pptp.

8. ENJOY =)

5 langkah cara pakai vpn android PPTP tanpa program

Cara Membuat Koneksi PPTP VPN di Android

• Buka 'Settings' kemudian pilih Wireless & networks atau Wireless Controls tergantung versi android anda

• Pilih VPN Settings, klik 'Add VPN' kemudian pilih 'Add PPTP VPN'

3. Isi semua data-data yang diperlukan

4. VPN name = berikan nama untuk koneksi yang akan dibuat

5. VPN Server = masukkan nama server sesuai provider VPN yang anda pakai

9 langkah cara pakai vpn IOS tanpa program

Setting up your VPN with your iPhone/iPod Touch/iPad

Setting up PublicVPN access with the iPhone/iPod Touch/iPad is simple. The following instructions go step–by–step through the creation process.

1. System Requirements

You'll need iPhone/iPod Touch/iPad. These pictures are for iOS 2.x, but everything works fine up to and including iOS 6.

2. Open Settings

First, open the iPhone/iPod Touch/iPad Settings.

3. Open General

Next, open the General Settings.

4. Touch Network

Open the Network settings

5. Touch VPN

Configure a VPN by touching the VPN button. If you don't have a VPN configured, you'll see "Not Configured." When you touch the VPN button, you'll start creating a new connection. See the picture on the left.

If your screen looks like the one on the left, touch the VPN button and skip to "Setup VPN"

If your screen looks like the one on the right, touch the VPN button and continue.

  

Add Configuration

Configure a new VPN connection by clicking "Add VPN Configuration..." as seen below.

  

6.Setup VPN

You should see the VPN information page. Fill out the field as they look below.

In the Description field, type "PublicVPN L2TP"
In the Server field, type "gateway.publicvpn.net"
In the Account field, type your PublicVPN.com username
In the Password field, type your PublicVPN.com password
In the Secret field, type 'publicvpn.net' (without the quotes)

Make sure that "Send All Traffic" is "ON". Then touch "Save"

7. Setup PPTP

While you don't need to, we recommend that you have both an L2TP/IPsec configuration and a PPTP configuration set up. In some locations one protocol works and not another, so it's good to have both of them. To configure your PPTP configuration, click "Add VPN Configuration" and touch the "PPTP" tab.

In the Description field, type "PublicVPN PPTP"
In the Server field, type "gateway.publicvpn.net"
In the Account field, type your PublicVPN.com username
In the Password field, type your PublicVPN.com password

Make sure that "Send All Traffic" is "ON" and that the "Encrpyption Level" is "Auto". Then touch "Save"

8. Connecting to the VPN

When you want to connect to the VPN, Click Settings, VPN, select the VPN that you want to connect to, then turn the VPN on. That should be it!

9. ENJOY =)

8 langkah cara pakai vpn windows 7 tanpa program tambahan

Ok, untuk postingan kali ini admin hanya akan share tutorial menggunakan VPN pada OS Windows 7. Untuk lebih detailnya, ikuti langkah-langkah di bawah ini.

1. Buka Control Panel, lalu pilih Network and Sharing Center.

2. Pilih dan Klik Set Up a New Connection On Network.

3. Pilih dan Klik Connect to a Network Places, lalu Next.

4. Kemudian Klik Use My Internet Connection VPN.

5. Masukkan IP Address Public yang diperoleh dari Server VPN

6. Masukkan username dan password VPN Anda.

7. Terakhir klik tombol Connect. Tunggu hingga komputer tersambung ke Internet.

8. ENJOY Mudah bukan? =)